The main purpose of heat-reflective coated glass by reducing the transmission of solar energy to reduce the amount of heat the acquisition. These films in the visible region, generally have low to moderate transmission, and they usually higher reflectivity than standard white glass. They have from 8% to 45% of the low permeability. There will be some changes in the appearance of color, but not high, Binzhou lowe glass, because they are absorbed by the film, the color change is very small. Single silver coated glass radiation is less than equal to 0.15, the heat transfer coefficient of the hollow product is less than 1.8, the product with respect to the white glass has a good energy saving effect. Low-E coated glass using the purpose of large area lighting, interior bright and close to nature, which requires high transmittance; but do not make it an indoor tan hot sun, lowe glass windows, which requires shading coefficient as small as possible, the sun blazing southern region in particular. Select the greater the coefficient, the better the performance. From heat-reflective silver single product to product selection coefficient has doubled, lowe glass, leap thermal properties of nature. In addition to the requirements of glass curtain wall light shade is good, but also requires good insulation properties, especially for cold northern winter, so you can save energy; heat reflecting generally use a monolithic, offline single silver and double silver should synthetic insulating glass use, hollow glass insulation performance is much better than monolithic glass. For example, the average U-value heat-reflective 6mm white glass monolithic product is about 4.7, the average U-value single silver products is about 1.8, a single silver hollow products, better insulation performance than monolithic heat reflective insulation products . Single silver coated glass radiation is less than equal to 0.15, the heat transfer coefficient of the hollow product is less than 1.8, the product with respect to the white glass has a good energy saving effect. Low-E coated glass using the purpose of large area lighting, interior bright and close to nature, which requires high transmittance; but do not make it an indoor tan hot sun, which requires the shading coefficient as small as possible, for blazing sun in the south in particular. Select the greater the coefficient, the better the performance. From heat-reflective silver product to a single product, select the coefficient increased by 1 fold leap thermal properties of nature. In addition to the requirements of glass curtain wall light shade is good, but also requires good insulation properties, especially for cold northern winter, so you can save energy; heat reflecting generally use a monolithic, offline single silver and double silver should synthetic insulating glass use, hollow glass insulation performance is much better than monolithic glass. For example, the average U-value heat-reflective 6mm white glass monolithic product is about 4.7, the average U-value single silver products is about 1.8, a single silver hollow products, better insulation performance than monolithic heat reflective insulation products . lowe glass wholesale | Binzhou lowe glass | Yaohui Quality Assurance (view) provided by Jinan Glass Co., Ltd. Yaohui. Jinan Yaohui Glass Co., Ltd. (www.jyhhc.com/) is specialized in "insulating glass, tempered glass, laminated glass, LOW-E glass" of the enterprise, the company adhering to the "honesty, hard service" concept, for you provide the highest quality products and services. Welcome to inquire! Contact: Liang Jingli.